Carbon Monoxide Detectors

About 200 people die each year from carbon monoxide poisoning associated with home fuel-burning heating equipment. Carbon monoxide is a colorless, odorless gas that is produced when any fuel is incompletely burned. Symptoms of carbon monoxide poisoning are similar to flu-like illnesses and include dizziness, fatigue, headaches, nausea, and irregular breathing. Carbon monoxide can leak from faulty furnaces or fuel-fired heaters or can be trapped inside by a blocked chimney or flue. Burning charcoal inside the house or running an automobile engine in an attached garage also will produce carbon monoxide in the home.




The first line of defense against carbon monoxide is to make sure that all fuel-burning appliances operate properly. Consumers should have their home heating systems (including chimneys and flues) inspected each year for proper operations and leakage. Inspectors should check all heating appliances and their electrical and mechanical components, thermostat controls and automatic safety devices.

Properly working carbon monoxide detectors can provide an early warning to consumers before the deadly gas builds up to a dangerous level. Exposure to a low concentration over several hours can be as dangerous as exposure to high carbon monoxide levels for a few minutes - the new detectors will detect both conditions. Most of the devices cost under $100. Each home should have at least one carbon monoxide detector in the area outside individual bedrooms.

Gas sensors in CO alarms have a limited life span, typically two to five years. The test button on a CO alarm only tests the battery and circuitry not the sensor. Alarms over five years old should be replaced but they should be checked on installation as well as annually, along with your smoke detectors.

Smoke Detectors - If it's not hardwired in - Change the batteries!

I'm currently working on some home safety articles and so I figured I would share on here also!
Here goes!

One of the most important fire safety devices for the home is the smoke alarm. The primary job of the smoke alarm is to protect you from fires while you and your family is asleep. Your alarms should be located on each floor level of the home, and in each bedroom. There are two types of home smoke alarms available; the ion type and the photoelectric type. The ion type reacts faster to open flaming fires. The photoelectric type reacts faster to smoldering fires and is less likely to react to cooking. Both types provide good protection and can be used without worry.

Fire safety organizations promote "change your clocks, change your batteries" when the change is made back from daylight savings time each fall. Smoke alarms installed in a house may be operated from the household electrical power and not need battery replacement. This type of alarm has a "power on" light to tell you that the alarm has power. Smoke alarms are available which run on house power but also have a battery in case the main power fails. Both types of alarms need to be tested monthly and batteries should be replaced yearly just as with the battery-only operated type. If the testing mechanism does not work properly, the alarm should be replaced immediately. Don't forget! Make and practice your families emergency escape plan!